Showing posts with label CO2 Laser. Show all posts
Showing posts with label CO2 Laser. Show all posts

Tuesday, February 10, 2009

Case Study - CO2 vs Fiber

Laser marking on stainless steel with a CO2 laser is very timely and messy process. Due to the reflective nature of the metal surface and the operational wavelength, CO2 laser systems require a laser marking material (LMM,) to permanently mark the surface. The LMM is sprayed onto the surface and has to be allowed to dry before marking. The surface also has to be cleaned after marking. All of this work makes the alternative, Fiber Lasers, very appealing.

Fiber Laser Marking on Stainless Steel


Q-Switched Fiber Lasers are ideal for marking on stainless steel and other metals, as no LMM is needed.

For this application, Laser Photonics applications engineers used the FiberTower XP Compact system with a 20 Watt Q-Switched Fiber Laser equipped with a 160mm F-theta Lens. The stainless steel sample parts were marked at a depth of approximately .001, using the process of surface etching. The mark is etched by vaporizing the surface of the material at very high speeds, providing very minimal damage to the part. This is usually done when a quick mark is needed and cycle time is an issue. A surface etch gives a high contrasting mark and is ideal for marking on coatings without penetrating through, such as chrome, nickel, etc. Several marks were made by our engineers. The first mark was made in one pass to show optimum cycle time of 12.5 seconds, which is 5 inches per second. The goal of the application was to process the best quality samples while maintaining an acceptable cycle time.

For Other Applications - Browse Laser Photonics' Applications Database!

Try Before You Buy! Did you know Laser Photonics will process your samples according to your specifications for FREE? Simply send us several samples of your product with a complete description of your marking or cutting requirements. Your processed parts, together with a detailed applications report and equipment recommendations will be returned to you at no charge.

Monday, December 15, 2008

Laser Cutting Foam Samples

Laser Cutting Application:
Our application engineers cut foam samples using the Fantom 100 (100w CW CO2 10.6um) equipped with a 300mm focal length lens. For most foam materials, a large thickness can be cut with a relatively short focal length optic. On these samples, the protective backing was removed and then the foam material was cut in to 0.5" strips, in one pass, in just .53 seconds per line. The samples were cut with an emphasis placed on causing little to no damage to the edges of the foam and adhesive backing. A sealed CO2 laser cuts styrofoam equally well. To achieve the best possible edge quality, little to no gas assist pressure should be used during the cutting process.

The Fantom F-100 CO2 Marking Systems are small enough to mount easily on a bench or small machine tool for process development, yet powerful enough to cut, weld, scribe, or mark the most difficult materials. If you’re looking for a cutting solution resulting in no discoloration, distortion or melting of foam, the Fantom F-100 CO2 Marking Systems are right for you!

Test Drive a Laser System...For Free

Are you looking for a solution for your engraving, cutting or marking jobs? Laser Photonics is the industry leader in developing high-tech fiber and CO2 laser systems specifically for those applications.

Free Custom Sample ProcessingWondering if your process can be enhanced by one of our systems, why not send us some samples of your product? Our experienced staff of applications engineers are familiar with a wide variety of applications across many different manufacturing industries. Once we receive the samples and a complete description of your marking or cutting requirements, we’ll process your parts and return them with a detailed applications report. We’ll also make some equipment recommendations – all at no charge.

CASE STUDY
Everything’s better with cheese…and the Fantom F-100 CO2 Laser
Individual serving packets, such as those used for catsup or other condiments in fast-food and other restaurants, usually feature a small cut for ease of opening. Laser Photonics was approached by a customer to use one of our systems to make the ‘easy opening cut’ on their individual serving packets of cheese. Once the customers’ samples arrived at our facility, our applications engineers went to work. Using the Fantom F-100 CO2 laser, the samples were processed with 100w CO2 laser (10.6um) through a 300mm focal lens. The mark was completed at the customers’ specification of 2.5mm long and was completed in one pass in just .04 seconds.


Common Applications for the Fantom F-100 CO2 Laser
· Alphanumeric, Logos, Serial Numbers, Part
· Numbers, Lot / Date Codes, Schematics, Complex Graphics, Pictures,
· Logos Etching (Material Vaporization)
· OCR Code Marking (Human and Machine Readable)
· Direct Parts Marking, Bar-coding, 2D Data Matrix

· 2D Symbologies Linear Barcodes
· Lot Codes, Date Codes
· Production In line Integration
· IC Chip Package Marking
· UID - Unique Identifier
· Marking “On the Fly”

Fantom F-100 CO2 Specifications
The Fantom F-100 CO2 Marking Systems are small enough to mount easily on a bench or small machine tool for process development, yet powerful enough to cut, weld, scribe, or mark the most difficult materials.

This unit offers 100W of power, and output wavelengths of 10.6 microns. It provides the greatest flexibility to both end-users and OEM systems integrators. This system can be easily re-configured for direct installation into a production line and can connect to external control device. It was designed for maintenance-free Direct Part Marking (DPM) applications and was built to operate under high shock, vibration and dust conditions. Additionally, the F-100 system is air-cooled and plug and play capable.

Applications & Materials
• Anodized Aluminum • Surface Annealing • Surface Texturing • Surface Marking
• Surface Etching • Stainless Steel • Composites • Ceramics • Graphite • Titanium
• Ablation • Rubber • Plastics • Acrylic • Wood


Laser Photonics offers CO2 laser marking systems from 10 to 300W of average power, up to 900W of peak power, at output wavelengths of 10.6 microns. The Fantom F-100 Co2 laser system provides the greatest flexibility to both end users and OEM system integrators. The packages offered are custom tailored to your specific marking needs.


Laser Photonics is the industry leaders in developing high-tech Fiber and CO2 laser marking, cutting and engraving systems for a variety of industries, such as; aerospace, automotive, medical, solar and semiconductor to name a few. We exceed in manufacturing high quality, performance driven turnkey solutions for these and many other industries.

Friday, December 12, 2008

Business Cards and Lasers

Just found another blog for a business consultanting company with an article about laser die-cut business cards and how to make your business cards stand out from the crowd using tricks like - odd sizes, gloss finishes and embossing. All good tips I think. Here's his site:

Reading this made me think I remembered seeing a business card made using a laser in one of our applications pictures. And sure enough, the applications engineers here at Laser Photonics made this (pictured) business card out of wood. It was cut and marked using a Laser Photonics CO2 Laser System. Something like this definitely makes a memorable impression for tradeshows and other meetings. I went to a Home Show once here in Orlando, Florida and a cabinet company had mini-cabinet doors for a business card and a "sample" of their work...that was a few years ago, and look - I'm still talking about them!
For more information on other things we've cut, maked or engraved to show the capabilities of our systems: Search Laser Photonics Applications Database Now.

Fashion and Lasers


Today I just stumbled on this blog about using lasers in fashion. I'm continually amazed at the number of industries that laser technology touches -- from the automotive, aerospace, industrial, defense, electronic and medical industries -- and now, I discover, the fashion industry as well.

To see the Spring 2009 fashion collection, made with the help of lasers - click this link:

Apparently, lasers have been used to cutting fabrics for the fashion industry for quite some time; however, according to this blog, "laser cutting may be one of the new waves in fashion design, and we may start seeing a lot more of it."


Upon checking, Laser Photonics applications engineers had already completed several "fashion industry" applications at our facility in Lake Mary, Floirda. The three images attached show the applications we performed inwhich leather that was cut using a CO2 laser system to make shoes!

According to Wiki:

“Laser cutting is a technology that uses a laser programed by a computer to cut materials.the material then either melts, burns, vaporizes away, or is blown away by a jet of gas, leaving an edge with a high quality surface finish.”

Thursday, December 11, 2008

Hey! That's MY Sub!

Never again will your sub sandwich be taken from the employee refridgerator at work - not if you mark the label with a CO2 Laser System from Laser Photonics!

Watch it Now!

We hope you enjoy this unique video showcasing the versitility of our laser systems...and for those of you wondering, yes this was just done for fun - and shameless promotion of our products of course!

Wednesday, December 10, 2008

CO2 Lasers - Not just for work anymore!

Marking or etching with lasers can produce some great artwork as can be seen in these photos. Using a CO2 laser, the applications engineers at Laser Photonics marked the ducks on glass and the crane images was marked on tile. CO2 laser-equipped systems provide highly accurate cutting, welding, engraving and marking capabilities for multiple materials.

Recommended Systems for these applications:

The SBM 1200M laser cutting and laser engraving machine comes equipped with CO2 laser combining flying optics with a precision Direct Drive motion system. CO2 laser equipped system provides highly accurate cutting, welding, engraving and marking capabilities for multiple materials.

The Fantom F30 CO2 OEM Laser Marking Kit is the most advanced and fastest Wave Guide CO2 laser marking system available today for integration into production lines, marking, perforating and pharmaceutical equipment. The F30 is air cooled, completely sealed, and maintenance free with a PC based DSP controller, mounting hardware, and robust marking software with an easy-to-use graphical user interface.

Monday, December 8, 2008

Laser Photonics Holds Open House and Offers Distributor Training

Distributors and Sales Agents from around the world to attend Laser Photonics Systems Training and Open House

Lake Mary, FL., December 8, 2008 - Laser Photonics, the industry leader in developing high-tech fiber and CO2 laser systems for marking, cutting and engraving applications, announced today its first Distributor and Sales Agent Training and Open House event scheduled for December 8th and 9th, 2009.



“As of today, Laser Photonics is represented in over ten countries including China, Mexico, Singapore, India and Turkey, said Todd Hockenberry, Executive Vice President of Sales and Marketing for Laser Photonics. “This training is a fantastic opportunity to bring our distributors together to meet, learn and brainstorm. The end result benefits our customers throughout the world.”

The two day training encompasses a range of modules from system training to sales tactics to marketing tips and hands on learning where each distributor will experience systems such as the Titan Series, Laser Photonics fiber laser cutting machine, first hand. Additionally, distributors and sales agents will have the opportunity to tour the 318,000 square foot facility and meet key contact personnel from Laser Photonics executive, engineering, sales and marketing departments.

FiberTower Networking Capabilities New 2009 Standard Feature

Control Numerous Laser Marking and Engraving Systems from One Computer

Lake Mary, FL., December 8, 2008 - Laser Photonics, the industry leader in developing high-tech fiber and CO2 laser systems for marking, cutting and engraving applications, announced today the latest networking capabilities available on the 2009 FiberTower™ Series Fiber Laser Marking and Engraving Systems. This new feature, available on all 2009 FiberTower™ systems, allows users of multiple machines to control all systems from one main hub.

“Having such streamlined control of all of your systems, saves time and money,” said Ryan Semmer, Laser Photonics’ product marketing manager. “This centralized control feature is available through an ethernet connection or wireless access and will be a standard feature on all 2009 FiberTower™ Series systems at no additional charge.”


About Laser Photonics: Developing laser marking, laser cutting and laser engraving systems for precision material processing industries, Laser Photonics is leading the way with innovative fiber laser and CO2 laser systems. Our laser machines are used by manufacturers in the automotive, aerospace, industrial, defense, electronic and medical industries around the world. For additional information on Laser Photonics Fiber and CO2 Laser Systems for marking, cutting and engraving applications, please contact a representative at 1-407-829-2613, or visit http://www.laserphotonics.com/.

Wednesday, December 3, 2008

74,924 REasons to Upgrade your CO2 Laser to a Fiber Laser

When lasers were invented in 1960, they were called "a solution looking for a problem". Since then, they have become ubiquitous, finding utility in thousands of highly varied applications in every section of modern society, including consumer electronics, information technology, science, medicine, industry, law enforcement, entertainment, and the military.

Now with so many diverse industries using so many various applications, lasers have firmly rooted themselves as a necessary solution for new problems encountered. Today, end users have perhaps more choices than Einstein ever dreamed possible -- from laser types, to methods of processing, depths of cuts, marks and engravings, focal lens lengths, power settings, frequency, speed, number of passes and more.

Selecting the Right Laser System
Due to all the options available to end users, selecting the right laser for an application can be an arduous process and deciding to upgrade from a CO2 to a fiber laser system may bring even further challenges. Laser Photonics can help answer those tough questions and has provided our customers with a new tool to compare systems. Using the Cost Comparison Calculator found on the home page of http://www.laserphotonics.com/, customers can key in their location, the power of their CO2 laser and their typical daily use. The calculator will then reveal pertinent information such as: the tremendous cost savings, increased reliability, and enhanced beam quality and spot size of Laser Photonics Fiber Laser Systems. Users will quickly see what was once the top of the line CO2 laser system, and the best solution several years ago, now greatly pales in comparison to a new Laser Photonics Fiber Laser System.

SAMPLE COMPARISON
Let’s say your plant is in Florida and you currently are running a 1000w CO2 laser for 8 hours a day. Your electric power consumption with the CO2 laser is very high. Based on Florida’s average power cost of .1045 per kWh, that 8 hour daily shift, working 250 days per year, will cost you $7,942 in electric costs per year.

Then, consider your yearly maintenance of $45,000 and estimated assist gas consumables (6 l/h Nitrogen, 1 l/h Carbon Dioxide, 13 l/h Helium) at a cost of $11.67/h per year. That will add another $23,340 per year in costs.

Total cost to run your CO2 laser each year? A staggering $76,282.

Now, let’s take that same scenario, same run times and cost per hour figures and look at using a new Laser Photonics Fiber Laser System. The 1000W CO2 Laser System you’re currently using can be replaced with a 500W Fiber Laser System which has equal cutting quality and speed. With your new fiber laser, much less power is required for cutting reflective materials like aluminum or copper since more of the laser energy is absorbed by the substrate. This allows for intricate high-quality cutting at higher efficiencies than comparable laser cutting systems.

Your new fiber laser will have very low power consumption. Using the same sample data to compare -- your plant is based in Florida, running a 1000w Co2 laser, 8 hours a day for 250 days a year, the power costs will only be $1,359 per year. Remember, this is based on Florida’s average power cost of .0145 per kWh -- your states average power cost may be higher or lower.
Maintenance costs are easy to calculate for your new Laser Photonics Fiber Laser System -- $0. The fiber laser has no maintenance costs, no consumables and no cleaning of or alignment of mirrors for beam path is needed.

In the end, the yearly cost to run your new Laser Photonics Fiber Laser System? Just $1,359. That’s a savings of $74,924.

How can Laser Photonics help you?


CALCULATE YOUR SAVINGS NOW